Scatter file is a file used to describe the loads of regions in a specific android device running MediaTek’s ARM architecture. So scatter file is needed to flash/download ROMs, recoveries, logo etc. Must people uses wrong scatter file and get errors during flashing ROMs.So you need a scatter file to use SP flash tool in fixing a bricked Android or flashing files to it
If you’re looking for a tutorial on how to make a scatter file for your MTK/MT Android device, then you’ve come to the right place.
How To Make Scatter File.
To create a scatter file, you need to have the entire requirement below:
=>MTK/MediaTek based smartphone
=>USB Data Cable
=>USB ADB drivers installer: Click HERE to download it
=>MTK Droid Tools: Click HERE to download it
Note:The steps below are applicable for android devices with MT6595, MT6582, MT6589, MT6592, MT6577, MT6589T, MT6572
Step 1 – Enable USB debugging from your android device.
Step 2 – Connect your android device to your PC via USB cable and driver will install automatically since we have USB ADB VCOM drivers installed.
Step 3 – Extract, and run the MTK Droid Tools.
Step 4 – The MTK Droid will display your phone information
Step 5 – Click ‘blocks map’.
Step 6 – Click ‘create scatter file’ and Navigate to where you want to save it. Save it in a place where you won’t lose it.